7 Essential Tips for Operating an Industrial Ride-on Floor Scrubber

When you need to clean a huge area of any professional environment, you cannot always take manual help. Conventional methods of cleaning may leave much dust and debris behind because of the lack of range in manual tools for cleaning like mops, brushes, brooms, and wipers. Moreover, it will also get extremely exhausting to clean such big areas as industrial establishments with manual methods. You will also need to hire too many cleaning personnel, which will greatly increase costs.

Nowadays, many industrial cleaning machines like sweepers and scrubbers are available. These are operated on fuel or electricity, saving you the great exhaustion of cleaning. Being mechanical, they also cover vast areas in a very short time thereby reducing your costs to hire so much cleaning staff. 

An industrial ride-on floor scrubber is a machine that will clean vast spaces with the help of its mechanical tools, and allow you to ride on it thus ensuring a smooth cleaning process. It can eliminate all remaining specks of dust and debris from vast industrial spaces in a very short time. But you should also be aware of how to operate these machines to address any sudden malfunctions promptly. Learning about the details of its operation will also help you to prevent mishaps while cleaning with this device.

7 Operational strategies for ride-on industrial scrubbers

An industrial ride-on scrubber will help you clean large spaces without any hassle. There are various kinds of ride-on scrubbers for industrial establishments capable of cleaning small to large spaces with great maneuverability that will leave no debris behind. These include warehouse scrubbing machines like ASC E110 R or a compact-sized ASC Eureka E75 scrubber. These kinds of industrial scrubbing machines include various parts like brushes and pads, batteries, battery chargers, and flashing lights that need to be taken care of while operating.

At the same time, machines vary according to the surfaces they can clean. For example, the ASC Eureka E110 can clean a wide range of floor materials like ceramics, marble, cement/concrete, linoleum, non-slip surfaces, porcelain tiling, and many others. But each ride-on cleaning machine will have its unique parts, features, facilities, maneuverability, and range of surfaces it can clean. Here are 7 tips for you to go through before operating a ride-on industrial floor scrubbing machine-

1. Controlled Pace- Before you begin cleaning with your ride-on floor scrubber, you should be careful of your pace. Do not go very fast while cleaning with the industrial cleaning equipment. This can cause damage to the machine parts. Thus, you should work in straight, parallel rows of a surface. Overlap each patch slightly, so you can prevent missed spots that may need cleaning.

2. Correct utilization of ancillaries- Some scrubber machines have additional features like options to adjust the water flow level and the brush’s pressure. Use these options wisely according to requirements, to prevent any wastage of water or other resources.

3. Recovery tank inspection- Ride-on scrubbers for industrial establishments like ASC Eureka 85 have recovery tanks that can be opened to inspect what needs to be done to keep the operations going perfectly. You should always keep a check on the recovery tank in your industrial floor scrubber and empty it as and when you need to.

4. Periodical checking of solution tank- Keep an eye on the solution tank. It may get emptied while cleaning very large spaces in industrial settings. So, you need to keep a check when water is needed in the solution tank and keep adding it accordingly.

5. Disposal of floor pads- Most scrubbers dry the surface that they clean as they move ahead. This feature is found in ride-on scrubbers like ASC Eureka 83. If you notice that your surface is not drying, wait till it does and dispose of the floor pads according to directions.

6. Regular charging- Do not forget to plug in your ride-on floor scrubber to charge after each use. This will help you set to work without delays in the future.

7. Technical know-how- Read the manufacturers’ instruction manuals carefully before to avoid malfunctions. Knowing of all basic operative features beforehand will help you clean efficiently without interventions.

Conclusion

Ride-on floor scrubbing machines are intrinsic to the cleaning operations in large industrial establishments. They cover huge areas in a very short time. However, being aware of their features and cleaning according to the machine’s range of motion is important to avoid malfunctions. Users should also keep a lookout on battery requirements and tank contents of these machines to achieve smooth operations.