ASC is proud to offer high-quality and time-saving manufacturing industry cleaning equipment with clients including Kingspan Water in Melbourne and Queensland’s Heka Hoods.

One of our most popular products? The ASC MEP Eureka, also known as the Evo.

A walk-behind sweeper, the device is the first of its kind to have solo dust control which means it doesn’t blow or scatter debris – making the ASC MEP Eureka a piece of leading manufacturing plant cleaning equipment.

To demonstrate this, Heka Hoods, an awning system manufacturer based in Queensland, came to ASC for help finding a cleaning device.

The company’s challenge was tackling a large amount of dust building in the warehouse as a consequence of aluminium material production. Staff used vacuum cleaners to try to clear the debris but this was both costly and exhausting.

So we recommended that they try the ASC MEP. Since investing in the machine, the company has been able to trap dust gathering in the production area courtesy of its patented internal filter. Staff members were also impressed by how easy it is to clean the ASC MEP after use.

Another client who reaped the benefits of the device is Kingspan Water in Melbourne. The company required a cleaning device to tackle the enormous amount of dust blowing into their factory from construction work taking place outside.

We recommended that they invest in the ASC MEP sweeper which has since transformed the way in which they work. Staff members don’t need to spend more time cleaning manual brooms after use and can now focus on the task on hand.

To learn more about our products, make sure to read our manufacturing sites cleaning equipment case studies below.

Sekisui Ribloc and its new ASC Eureka M3

Posted on Sunday, December 6, 2020

Sekisui Ribloc and its new ASC Eureka M3

The Client; SEKISUI Rib Loc Australia Pty Ltd is a leading manufacturer of pipeline rehabilitation technology. They restore underground infrastructure and are based in Adelaide, South Australia. The Challenge. The company had a problem with the capture of fine airborne dust. Until the purchase of the new ASC Sweeper they had used a commercial grade sweeper from another company that was not efficient enough to meet their debris & dust control targets. They researched the market and asked ASC’s Ken Pepyat to arrange an onsite demonstration for them. The material to be swept up ranged from steel swarf, plastic off

Read More
Johndec Moves Forward With Their ASC MEP

Posted on Wednesday, December 2, 2020

Johndec Moves Forward With Their ASC MEP

Client introduction: Johndec Engineered Plastics is a family run business in the industrial section of Landsdale in Perth’s northern suburbs. They specialise in fabrication of chemical resistant plastics, like Fume Cupboards, Extraction fans and Fume Handling equipment.. The Challenge: ASC Manager Ross Sheehan called in to see a few of our local neighbors around the new ASC WA Wanagara Warehouse where he met Simon from Johndec. Simon was interested to learn that there was a new dustless sweeper on the market without need for batteries & had a dust filtration. Jondec had a problem collecting plastic shavings & forklift rubber

Read More
Palletmasters Conquer Their Dust Levels

Posted on Friday, October 23, 2020

Palletmasters Conquer Their Dust Levels

Palletmasters has been Queensland’s leading manufacturer and supplier of pallets since 1987. They design and customise high quality, fit for purpose wooden pallets, skids and crates to suit the specific needs of our customers. The problem. Palletmasters have a large floor span. They recently asked ASC’s Rafael Rodrigues to visit their site and recommend a cost effective solution to minimize their dust levels on the floors. They needed to sweep up timber off cuts, saw dust, forklift tyres dust as well as nails that fell of their production lines while assembling pallets. They also required the sweeper to be able

Read More
AMA Precast Tackle & End Silica Dust Issues

Posted on Thursday, October 22, 2020

AMA Precast Tackle & End Silica Dust Issues

AMA Precast Panels is a concrete precast facility based in Derrimut Victoria. The problem. AMA Precast panels manufacture concrete wall panels and had a problem with dust around their floors. AMA had tried many other brands of sweepers in recent times but they simply did not do the job and blew dust everywhere. They specifically asked for a PROVEN sweeper that was widely used in the concrete industry and could cope with their tough conditions. ASC’s Ken Pepyat recommended both a large ASC Eureka M6 sweeper as well as the dust free manual push sweeper (MEP). The result. Sam Azzopardi

Read More
Lightwave Yachts Yatala Conquer Airborne Dust Using a ASC MEP

Posted on Sunday, September 27, 2020

Lightwave Yachts Yatala Conquer Airborne Dust Using a ASC MEP

Client Introduction. Lightwave Yachts is a leading world class multihull design and manufacturing catamaran company. Founded by high profile identity Roger Overell, Lightwave Catamarans remains as the only Australian manufacturer of production cruising catamarans. The problem: Lightwave yachts recently moved to a larger facility in Computer Road Yatala. They were looking for a solution to replace the brooms and airborne dust. The process of making Catamarans involves using alot of epoxy resins, metals, fibreglass and aluminium. When combined with modern manufacturing techniques, these material can create a lot of dust and there was simply no desire left for using manual

Read More
Good Bye Floor Dust, Hello ASC Eureka M1

Posted on Monday, September 7, 2020

Good Bye Floor Dust, Hello ASC Eureka M1

Client introduction: Ron Mack Machinery is one of Western Australia’s leading suppliers of Metalwork and Woodworking machinery based in Perth. The Challenge: Rod Potter (from Ron Mack) contacted WA Area Manager Ross Sheehan in February 2020 looking for a sweeper to help clean their large machinery showroom. They were using push brooms prior to Ross’ consult and were looking for a long term solution to eliminate floor dust. The problem was excess dust settling on machinery worth hundreds of thousands of dollars. From a retail perspective this was not a good look. The company was upfront with what they wanted.

Read More
Stratco Qld and ASC M5

Posted on Wednesday, August 19, 2020

Stratco Qld and ASC M5

Client Introduction. Stratco is a household name in Australia with a trading history of some 70 years in the building and home renovation markets. Stratco has become one of the largest producers and marketers of quality building and home improvement products in Australia. The Challenge. Stratco has a large manufacturing facility in Yatala (QLD). They recently inquired about a large rider on sweeper capable of sweeping dust and debris from their factory floor. They researched the market and looked what was available. They liked the ASC product offering and chose to see the ASC Qld facility. Stratco’s senior management choose

Read More
Kwik Lok Cheltenham go with ASC

Posted on Friday, June 26, 2020

Kwik Lok Cheltenham go with ASC

Kwik Lok Solves their plastic regrind Issues with an ASC M3 The Company. Kwik Lok is a global leader in package closures. They started out small and have grown into a multinational company producing billions of the small bag closures (bag ties) every year. The company is based in Melbourne’s suburb of Cheltenham. The Problem. The company has numerous warehouses that suffer with dust and spills of plastic regrind. The product is very difficult to sweep once on the floor. Alex Anselmo, Kwik Loks’s General Manager, asked ASC’s Ken Pepyat if he could offer a solution for the companies floor

Read More
Vetafarm NSW invest with ASC again

Posted on Tuesday, June 16, 2020

Vetafarm NSW invest with ASC again

Vetafarm is based in NSW picturesque region of Wagga Wagga. They are one of Australia leading companies when it comes to animal supplements locally and internationally. The problem. The company has three purpose built facilities within Wagga Wagga. They have operated a ASC M3 sweeper for more than 10 years in their warehousing facility and recently decided to add floor scrubber for their new state of the art GMP approved pharmaceutical plant and the food manufacturing facility operating in the suburb of Bomen, on Wagga’s outskirts. Prior to purchasing the ASC Eureka E 50 scrubber they would manually mop a

Read More
Mesh & Bar invest with ASC Again

Posted on Sunday, April 26, 2020

Mesh & Bar invest with ASC Again

Mesh & Bar Pty Ltd is one of Australia’s leading manufacturers of reinforcing steel and mesh products for the building industry. The Problem. Mesh and bar runs large facilities to produce bar. These facilities operate around the clock to support Australia’s ever growing infrastructure projects. These facilities experience high dust problems due to constant rolling stock and forklift & truck traffic shipping the bar in and out of the factories. The Solution. Bar and Mesh have historically used the ASC MEP dustless manual sweepers to minimize airborne dust in their facilities and keep their OH&S levels high. Recently the company

Read More
Com-Al/ Madrid Management FC Micro-mag client solution

Posted on Saturday, March 7, 2020

Com-Al/ Madrid Management FC Micro-mag client solution

Com-Al WA invest with ASC’s Ross Sheehan. Introduction Com-Al are a large aluminum and glass user in the suburbs of Perth, they design, manufacture and install commercial windows, doors and curtain walling systems. In 2019 they purchased a Eureka MEP sweeper with the intention of looking into a floor scrubber later. Challenge: The production area is split in two, glass and aluminum. They wanted a machine to scrub the area periodically to remove stains and forklift wheel marks. In the past Com-Al had hired a floor scrubber but now wanted to be more flexible with being able to clean areas

Read More
Kingspan Water (Victoria) make a clean sweep.

Posted on Tuesday, February 18, 2020

Kingspan Water (Victoria) make a clean sweep.

Kingspan Water is a Melbourne based manufacturing company based in Melbourne’s North West Suburb of Epping Victoria. They have just moved in to their new factory in Epping Vic. Kingspan manufacture colourbond steel water tanks and waste water systems. Problem: They had a lot of dust blowing into their factory from outside. This dust was a mixture of construction dust as well as dust from grinding and general airborne dust as a result of manufacturing. They problem was that it was very difficult to clean using brooms. Solution; Julian from Kingspan had asked ASC’s Ken Pepyat to demonstrate the ASC dust free sweeper after a referral. Once

Read More
All Mould Plastics Orange (NSW) goes with ASC

Posted on Tuesday, January 21, 2020

All Mould Plastics Orange (NSW) goes with ASC

The Challenge Charles (Managing Director) at All Mould Plastics, inquired with ASC to purchase a floor scrubber. All Mould Plastics is an injection mould company based out in the red sand of Orange (County NSW). Charles problem as an injection moulding company was the never ending build-up of dust and plastic shavings layered on his floor. It would take Charles a full day to clean his nicely painted floors so he finally called ASC out to demonstrate the ASC Eureka E50 floor scrubber to assess its benefits and performance. Charles takes major pride in the cleanliness of his workplace. ASC’s

Read More
Taylor Made Homes in Dubbo recently invested in 2 ASC M1 heavy duty sweepers

Posted on Friday, December 20, 2019

Taylor Made Homes in Dubbo recently invested in 2 ASC M1 heavy duty sweepers

Taylor Made Homes customize homes in their two large fully functioning workshops. The Challenge Taylor Made Homes operates 2 large workshops.  Manufacturing homes is a very messy job. Debris like wood, nails, tyre dust, rocks and dirt covered their concrete floors. ASC were contacted  by Paul Taylor (owner) searching for a solution to his debris problem. He took it upon himself to research on the internet what sweepers were available on the market. He liked the ASC Mach 1 and attended the ASC Warehouse in Rouse Hill (NSW) to see one operate in person. He was so impressed with the

Read More
Barben Architectural Hardware Replaces Their Old Sweeper with ASC M2

Posted on Saturday, December 14, 2019

Barben Architectural Hardware Replaces Their Old Sweeper with ASC M2

Barben Industries is a leading manufacturer of high quality architectural hardware. Based in Tingalpa QLD, Barben Industries specialise in the design and manufacture of entry door handles, bathroom accessories and cabinet hardware. Recently ASC’s Raf Rodrigues was asked to help the company find a solution to maximise their housekeeping standards. Challenge: Barben consolidated its operation from 2 small warehouses into one new building. Prior to the arrival of the ASC sweeper they were using a small push sweeper but with the new building being so large they were struggling to keep the place clean. The impressive new facility has large

Read More
Heka Hoods Find ASC MEP The Best Dust Solution For Their Warehouse

Posted on Thursday, December 12, 2019

Heka Hoods Find ASC MEP The Best Dust Solution For Their Warehouse

Heka Hoods is an innovative bracket-less awning system manufacturer based in Queensland’s Industrial Suburb of Kunda Park. Challenge: Heka Hoods warehouse got very dusty due to the high mount of aluminium material being processed. Being so busy the staff could not maintain the work place to a high standard just using brooms. The use of vacuum cleaners was just taking too time consuming and proved a very inefficient use of costly labour. Solution: Queensland’s ASC Representative Raf Rodrigues consulted the company and recommended the ASC MEP as a perfect fit for the job. They bought the machine on the spot

Read More
Superior Stone Unanderra Impressed with ASC Eureka E 51 Floor Scrubber’s Cleaning Capacity

Posted on Tuesday, December 10, 2019

Superior Stone Unanderra Impressed with ASC Eureka E 51 Floor Scrubber’s Cleaning Capacity

Superior Stone is a Wollongong based custom masonry manufacturer. The Challenge Like most masonry companies they had a massive problem with silica and concrete dust. The Owner Marco wanted to keep the workshop floors clean from powder and debris generated while cutting kitchen bench tops. He had many tight access areas and looked for a machine that could reliably clean his facility. His insisted on a heavy duty floor cleaning machine. The Solution They had a demonstration of the Eureka E 51 scrubber. They were impressed with its cleaning capacity and ability to clean the floor dust free using water.

Read More
Action steel Stawell (Vic) Is Extremely Happy with ASC M1 Sweeper Performance. Here Is How

Posted on Monday, December 9, 2019

Action steel Stawell (Vic) Is Extremely Happy with ASC M1 Sweeper Performance. Here Is How

Action Steel supplies and installs large Rural & Industrial Sheds around western & northern Victoria as well as southern NSW. The Challenge Welding, bending, grinding and cutting galvanized steel is both messy and dusty. Action Steels large factory had a lot of airborne dust as well as forklift tyre dust on their factory floor. This dust was a major problem in the loading areas as well as their steel welding and cutting manufacturing area. Action Steel had previously purchased  competitor’s walk behind sweeper that was unreliable and blowing more dust than it picked up. They were fed up with poor

Read More
ASC MEP Push Sweeper Keeps Kanyana Engineering Mandurah’s New Workshop Clean

Posted on Friday, November 22, 2019

ASC MEP Push Sweeper Keeps Kanyana Engineering Mandurah’s New Workshop Clean

Kanyana Engineering is in the Mandurah industrial estate just south of Perth. The Challenge: Kanyana Engineering are in the process of moving from one workshop to a new larger one. Tyre dust was a big problem for the company. They invest a considerable amount of money in a new Bystar Fibre Laser cutting machine that required the plant to be dust free. The Solution: The company called ASC’S Ross Sheehan to inquire about floor sweepers. The Directors of Kanyana wanted a solution to keep the new workshop clean from the start as the plant was being set up. Ross Sheehan

Read More
Newland Powder Coating Invested in ASC For Their Cleaning Challenges

Posted on Sunday, November 17, 2019

Newland Powder Coating Invested in ASC For Their Cleaning Challenges

Newland Powder Coating is based in Melbourne outer suburb of Campbellfield. Recently they asked ASC’s Ken Pepyat to see if there was a solution to pick up the excess dust from their powder coating operations. The Challenge The factory is 500 square metres and dust is a by product of powder coating metal. Until recently they had used hand brooms to keep the facility clean. This was proving too time consuming and a solution had to be found to make the job easier. The Solution Ken Pepyat, ASC’s Victoria Manager,  had visited the company and recommended the ASC M2 sweeper.

Read More
ASC M1 Sweeper – Solution to the Dust & Chalk Problem

Posted on Saturday, November 16, 2019

ASC M1 Sweeper – Solution to the Dust & Chalk Problem

Thurgoona’s CSR New CSR lightweight systems in Albury Invest in a ASC M1. The Challenge Cleaning a Plasterboard facility can be very time consuming and messy. The typical culprits of housekeeping include broken plasterboards, tyre dust and copious amounts of chalk boards that spreads from one end of the warehouse to the next. Until recently the company had used an inefficient push sweeper to try and clean up the facility. CSR’s store Manger Jason Collins has asked ASC to forward a solution to what was becoming an environmental issue. There simply had to be a better way to clean. The

Read More
Designer Flakes Found ASC ME a Thorough Cleaning & Time-Saving Option

Posted on Thursday, November 7, 2019

Designer Flakes Found ASC ME a Thorough Cleaning & Time-Saving Option

Designer Flakes is a Queensland based manufacturer of timber decorative seamless epoxy floors and walls, used widely in the commercial and also the domestic markets. The Challenge Bob Fletcher, Managing Director and flamboyant owner of Designer Flakes,  had askes ASC’s Rafael Rodrigues to demonstrate the ASC MEP dustless manual sweeper. Bob’s staff were predominately using vacuum cleaners to clean dust off the floor which was very time consuming and an inefficient and expensive use of available labour. The Result Following a demonstrated by ASC’s Rafael Rodriguez of the ASC MEP Bob felt like he finally found a solution to his

Read More
Heavy Duty ASC M3 Sweeper – High Quality Equipment to Eliminate Build Up of Dust & Debris

Posted on Thursday, October 31, 2019

Heavy Duty ASC M3 Sweeper – High Quality Equipment to Eliminate Build Up of Dust & Debris

Garfield Sawmill is a specialist timber milling hardwood company based in Melbourne’s outer eastern suburb of Pakenham. The Challenge Cutting and milling timber naturally generates a lot of dust. As the timber dust is so light and micro fine, wind scatters this dust around the site very quickly. Ron Miller, Founder and Managing Director, had trouble with this fine sawdust spreading around the building and his insurance was being compromised due to fire risks. Ron was also keen to make his facility cleaner and dust free. This would ensure the employees would have had better working conditions. Implementing a system

Read More
ASC E83 – The Most Economical & Easy To Use Dust Solution

Posted on Thursday, October 10, 2019

ASC E83 – The Most Economical & Easy To Use Dust Solution

Baker & Provan, a St Marys (NSW) based Engineering company, has further enhanced its reputation as one of Australia’s leading Engineering plants by investing in a Eureka E83 Ride on Scrubber for their facility. The Challenge Baker & Provan had a big problem with the dust that is created while manufacturing. Wind, movement of forklifts, cranes and truck traffic quickly spread dust and metals shavings all over the plants concrete surfaces. They do already possess an ASC M3 Ride on Sweeper which they use to pick up dust and debris. Baker & Provan Management went to market and invited many

Read More
ASC MEP Sweeping Machine Delivers Dust-free Facility to Ellus and Krue

Posted on Wednesday, September 4, 2019

ASC MEP Sweeping Machine Delivers Dust-free Facility to Ellus and Krue

Ellus & Krus is scientifically formulated skincare manufacturer in Queensland. The Challenge Dust is a never ending problem in Australia’s warehouses. Ellus and Krue looked to eliminate this issue by consulting ASC’s Rafael Rodrigues to find a solution. The Solution The company purchased a manual ASC MEP walk behind non powered dustless sweeping machine which will save them a lot of time and money cleaning and deliver them a dust free facility.  

Read More
Dowling Metal Products Chose ASC M3 For Its Ease Of Maintenance & Longevity Of Parts

Posted on Tuesday, September 3, 2019

Dowling Metal Products Chose ASC M3 For Its Ease Of Maintenance & Longevity Of Parts

The Challenge Dowling Metals had a big problem with the amount of dust that was building up in their new Murwillumbah manufacturing building. The Solution After much research Dowling Metals executives asked ASC’s Raf Rodrigues to demonstrate the ASC M3 ride-on sweeper. They had quickly seen the machines quality and efficiency. As engineers themselves it was easy to make a decision to invest in the ASC M3 due to its ease of maintenance and longevity of parts replacement. The Result A really clean dust free facility.  

Read More
ASC M3 Will Pick Fine Dust From Kingfield Galvanizing’s Plant

Posted on Monday, August 19, 2019

ASC M3 Will Pick Fine Dust From Kingfield Galvanizing’s Plant

Kingfield Galvanizing, a Somerton (Vic) based Galvanizing company, has further enhanced its reputation as one of Australia’s leading Galvanizing plants by investing in a Heavy Duty ASC dust free Eureka M3 sweeper in their new $20 million facility. The plant has become the benchmark for the future of Australia’s hot dip galvanizing industry. The Challenge. Kingfield Galvanizing had a big problem with the dust that is created while galvanizing steel. Wind, movement of forklifts, cranes and truck traffic quickly spread dust and metals shavings all over the plants concrete surfaces. Kingfield Management went to market and invited many sweeper suppliers

Read More
ASC Power Vac Helped Nicson’s Facility Get Rid Of The Polystyrene Buildup

Posted on Tuesday, April 16, 2019

ASC Power Vac Helped Nicson’s Facility Get Rid Of The Polystyrene Buildup

Nicsons Building Products welcome a ASC Power Vac Machine to their premises Nicson’s Building Products is a family owned business that supplies all components for residential house slabs and commercial projects that have a raft slab design. The group started as Waffle Pod Pty Ltd in 2000 manufacturing waffle pods in a small factory located at Penrith. With Engineers and builders understanding the speed and cost benefits of a waffle pod slab demand grew and Waffle Pod moved to larger premises in St Marys. In 2004 Nicson’s Building Products was established to meet client’s needs of offering a total slab

Read More
Unitised Building Saved 45% Of Cost By Owing A Pre-loved Sweeper Machine With Excellent Performance

Posted on Wednesday, March 20, 2019

Unitised Building Saved 45% Of Cost By Owing A Pre-loved Sweeper Machine With Excellent Performance

UB (Unitised Building) is a global leader in the modular and pre-fabricated building market.. The group manufactures a diverse range of volumetric and prefabricated buildings across Australia and Singapore. Their expansion into Australia has seen them operating in a huge warehousing / manufacturing complex in Melbourne’s outer Western Suburbs of St. Albans. The group had a huge battle with the retention and capture of concrete dust from manufacturing their modules. They consulted ASC’s Ken Pepyat on how best to eliminate their dust issues due to growing concern about OH&S. The company did not have the budget to invest in a

Read More
ASC Recently Installed A Dulevo 120 To PMP Print, Sydney’s Largest Print Media Company

Posted on Monday, February 25, 2019

ASC Recently Installed A Dulevo 120 To PMP Print, Sydney’s Largest Print Media Company

ASC recently installed a Dulevo 120 to PMP Print, Sydney’s larges print media company. The ASC Dulevo 120 is used to maintain the massive 10+ acre site that operates nonstop. The debris the new Dulevo 120 picks up includes tryre dust from heavy truck and forklifts traffic, paper dust as well as a huge quantity of off cut paper that rolls of cutting machines. As the company never closes, the machine is used by multiple operators & used to clean in the production areas as well as maintaining all the roadways. CNG (Compressed natural gas) is used on all mobile

Read More
UniStyle Cabinets (WA) Saves 84% Labour With No Dust Creation In Cleaning Using ASC M1

Posted on Monday, February 11, 2019

UniStyle Cabinets (WA) Saves 84% Labour With No Dust Creation In Cleaning Using ASC M1

Unistyle Cabinets, Osbourne Park is a quality Perth (Western Australia) based kitchen and cabinet maker servicing the Perth market. Creating kitchens is a very dusty business. Cutting and sanding plywood generates a lot of dust. UniStyle recently asked ASC expert floor consultant Ross Sheehan (WA) to help eliminate their dust problem and make cleaning their facility easier and much more time efficient. The company was using a industrial vacuum cleaner which would not only clog very quickly but also emit a lot of dust. It was a very ineffective way of sweeping timber dust. Ross consulted with the management of

Read More
ASC M6 Managed To Clean The Fine Concrete Dust From XL Precast’s Entire Plant

Posted on Monday, November 5, 2018

ASC M6 Managed To Clean The Fine Concrete Dust From XL Precast’s Entire Plant

XL Precast is a very large and successful pre-cast manufacturer for the building Industry. They recently moved into their new large Yennora (Sydney) facility and required the help of a sweeper company that specializes in the collection of very fine concrete dust. After an initial survey was completed, it was advised that the ASC heavy duty Eureka M6 was the best machine for their needs given that they: 1.Needed a machine they could use constantly 2. Had very fine dust to deal with 3. Needed a machine with the ability to perform tight turns due to volume of mobile traffic on

Read More
ASC MEP Became the Trusted Machine for Keeping AUSREO’s Brisbane Facility Clean

Posted on Thursday, November 1, 2018

ASC MEP Became the Trusted Machine for Keeping AUSREO’s Brisbane Facility Clean

AUSREO is Australia’s fastest growing supplier of reinforced steel used in the building industry. With warehouses scattered all over Australia, the need to keep their facilities clean is a huge task. Cutting, grinding and distributing reinforced steel is a dirty business. Pictured here is AUSREO’s latest addition to their war on dust. The Brisbane branch’s investment in an ASC MEP sweeper was designed to make cleaning effortless and their floors as dust free as possible.

Read More
Neumann Steel is Creating a Safer Work Place by Keeping All the Dust Away Using the ASC M3

Posted on Wednesday, October 31, 2018

Neumann Steel is Creating a Safer Work Place by Keeping All the Dust Away Using the ASC M3

Gold Coast based Neumann Steel recently received their first ASC Eureka M3 sweeper. Neumann manufacture and supply concrete reinforcing steel bent and cut rebar, reinforcement mesh, buildering hardware, bar chairs, mesh and column spacers. The Neumann Group is a very large concern in the Gold Coast area which employs over 500 people. The company invested in the M3 Sweeper for use in their production and warehousing sheds for sweeping up all the metal shavings and dust that is degenerated through the grinding of metal. The ASC M3 makes a big difference to the plant as the facility is maintained to a

Read More
Ingham’s, Australia’s Leading Integrated Poultry Producer, has Added the ASC Eureka M6 to its Fleet

Posted on Wednesday, October 31, 2018

Ingham’s, Australia’s Leading Integrated Poultry Producer, has Added the ASC Eureka M6 to its Fleet

Ingham’s, Australia’s leading integrated poultry producer has added to its fleet of ASC sweepers by investing in another ASC Eureka M6 for its new $275 Feed Mill located in Murray Bridge, on Adelaide’s outskirts. This is a state of the art, hi tech plant and the ASC Eureka M6 is used both inside and outside to sweep up all the fine dust that is generated from producing chicken feed. The ASC sweeper was commissioned by ASC (SA) Sales Manager Ken Pepyat to very happy staff members.

Read More
NSW Boat Manufacturer, Stebercraft Will Keep The Dusty Business Of Making Boats Clean With Their ASC Mach 1

Posted on Wednesday, October 10, 2018

NSW Boat Manufacturer, Stebercraft Will Keep The Dusty Business Of Making Boats Clean With Their ASC Mach 1

Stebercraft, a very large boat manufacturer based in the NSW country area of Taree, recently purchased an ASC Heavy Duty M1 sweeper. Finn Stricker, Factory Manager, gave the investment go ahead for the acquisition of the new ASC M1 with Jason Frendo, ASC Sales Manager happily delivering and inducting the machine to the site. Stebercraft are renowned for manufacturing high quality boats. The business of building boats is a very dusty, so the ASC M1 with the best dust filtration system on the market is the perfect machine for their environment, The Steber manufacturing plant is on a 4 acre site with

Read More
Sell & Parker Metal Recycling Services Adds a New ASC Sweeper Strengthening Their 20 Year Old Association With ASC

Posted on Thursday, September 27, 2018

Sell & Parker Metal Recycling Services Adds a New ASC Sweeper Strengthening Their 20 Year Old Association With ASC

Trading since 1966, Sell & Parker Metal Recycling Services is an Australian owned and operated private company. They are buyers and sellers of all grades and all quantities of Ferrous and Non-Ferrous metals. The company has over 200 employees and physical assets in excess of $120 million, including yards at Blacktown, Banksmeadow, Ingleburn, Coffs Harbour, Nowra and Newcastle. They have over 8 facilities across Australia; Port Hedland in Western Australia, Darwin in the Northern Territory, plus six yards across NSW including 3 in the Sydney Basin. A drive around their yards would take you on a journey of around 11,500 km and

Read More
Employees & Neighbours Say M.B. Pre-Fab’s Yard Has Never Looked Better After Using ASC Eureka M3

Posted on Tuesday, September 18, 2018

Employees & Neighbours Say M.B. Pre-Fab’s Yard Has Never Looked Better After Using ASC Eureka M3

In 2018, M.B. Pre-Fab stands as a Geelong (VIC) icon when it comes to quality wall frames and roof truss systems. The company started from humble beginnings in rented premises in Belmont (Vic) back in 1977. In 2000 M.B. Pre-Fab set up in a purpose built factory across the road with the first fully computerized wall framing division of its kind in Australia, assuring that quality controls were met and prices remained competitive. Doug Maxwell, Managing Director, recently invested in an ASC Eureka M3 sweeper to keep his facility clean. Producing wall trusses is a very messy business so keeping the factory

Read More
ASC Meets the Needs of CSR Gyprock In Handling the Cleaning of Their Grafton NSW Branch

Posted on Monday, August 13, 2018

ASC Meets the Needs of CSR Gyprock In Handling the Cleaning of Their Grafton NSW Branch

CSR Gyprock is Australia’s leading manufacturer of gypsum based products such as plasterboard and cornice, as well as compounds, adhesives, specialty plasters, associated finishing materials and accessories. Gyprock supplies a comprehensive range of high performance products and systems for many applications to meet fire, acoustic and thermal requirements across all segments of the construction industry. Pictured here is another ASC Eureka M1 sweeper delivered to their Grafton NSW branch. Dust is a big issue when you handle building materials. The stock has to be brought in as inward stock, placed on racks then re packaged in order to make it

Read More
Buckeridge Group of Companies (WA) Trusts ASC M6 to Clean Their Busy Plant That Runs 6 Days A Week.

Posted on Wednesday, August 8, 2018

Buckeridge Group of Companies (WA) Trusts ASC M6 to Clean Their Busy Plant That Runs 6 Days A Week.

BGC is the largest plaster and cement sheet manufacturer in Western Australia. The company is also a very large employer in WA and is a strong symbol of quality. Recently, their fiber cement production facility replaced their old ASC sweeper with a new ASC Eureka M6 diesel operated fully optioned machine. The ASC M6 is used to clean the whole plant, which runs 6 days per week. It can take as long as 8 hours to clean, but the ASC M6 is more than perfect for the job. It easily picks up cement and tyre dust on open concrete and

Read More
ASC M1 Picks Up Dust and Variety of Waste From Evolution Commercial’s Facility

Posted on Wednesday, August 8, 2018

ASC M1 Picks Up Dust and Variety of Waste From Evolution Commercial’s Facility

Evolution Commercial is a large Western Australian based vessel producer. Its core expertise is in the production of vessels and other large custom structures manufactured from one material including aluminum, steel, and fiberglass (FRP) composites. The company’s safety, health, and environmental systems and procedures meet the standards required by major international oil and gas companies; and are consistent with the requirements of the ISO 18001 and ISO 14001. The company recently invested in an ASC Eureka M1 sweeper. The M1 sweeper is used to keep the facility dust free. The machine picks up dust and a variety of waste from

Read More
O-I Australia Keeps its EPA Targets in Check With the ASC Dulevo

Posted on Saturday, July 14, 2018

O-I Australia Keeps its EPA Targets in Check With the ASC Dulevo

Glass container manufacturer O-I Australia has taken possession of an ASC Dulevo Street sweeper for their optical sorting plant in South East Queensland. The high-capacity cullet optical sorting plant recovers large volumes of recycled glass for use at the company’s glass container manufacturing plant in Brisbane. O-I Australia’s facility processes a significant volume of furnace-ready cullet. The plant ensures all the glass it recycles has an opportunity to be recovered through a closed-loop process and recycled into new glass containers – not down-cycled or sent to landfill. The new ASC Street Sweeper ensures the plant runs dust-free as a lot

Read More
Picton Hopkins Purchases 2X ASC Eureka M1 for Their Facility

Posted on Tuesday, April 24, 2018

Picton Hopkins Purchases 2X ASC Eureka M1 for Their Facility

Picton Hopkins and Sons Pty Ltd is one of Victoria’s oldest family businesses, with an unbroken family involvement dating back to 1857. Picton Hopkins are specialists in the manufacture of plaster products, covering items such as decorative and plain cornices, domes, vents, archways, ceiling roses, Adams panels, Art Deco and Post War panels, columns, Corbels, and the list goes on. Picton Hopkins recently purchased 2 x heavy duty ASC Eureka M1 sweepers for their Morwell and Preston Victoria stores. Until recently they were using generic sweepers that blew dust around and were inadequate for the job. After demonstrating the ASC

Read More