ASC Eureka E81
ECO-NOMY + ECO-LOGY = labour savings + less water/detergents.
The ASC Eureka E81 is a rugged, professional walk-behind scrubber-dryer, ideal for the trouble-free scrubbing of areas ranging between 3500 sq/m and 5000 sq/m. It has a cleaning path of 825 mm, and is equipped with a twin brush scrub deck which combined with a 4 km/h speed, boasts an area coverage of 3.300 sq/m/h.
Its frame is made of durable thick steel, sanded then coated with zinc-phosphate and treated with a thermo hardening powder. This conveys better durability of up to 3 times longer compared to a chassis treated with a standard method.
Designed around ASC Eureka’s ECO technology, models can be supplied with the exclusive ECO system. The range is also available in TRAC configuration.
Read MoreECO-NOMY + ECO-LOGY = labour savings + less water/detergents.
The ASC Eureka E81 is a rugged, professional walk-behind scrubber-dryer, ideal for the trouble-free scrubbing of areas ranging between 3500 sq/m and 5000 sq/m. It has a cleaning path of 825 mm, and is equipped with a twin brush scrub deck which combined with a 4 km/h speed, boasts an area coverage of 3.300 sq/m/h.
Its frame is made of durable thick steel, sanded then coated with zinc-phosphate and treated with a thermo hardening powder. This conveys better durability of up to 3 times longer compared to a chassis treated with a standard method.
Designed around ASC Eureka’s ECO technology, models can be supplied with the exclusive ECO system. The range is also available in TRAC configuration.
The ECO configuration is equipped with the new, exclusive ECO system (patented), which breaks water economy and detergent saving barriers, and has won several awards, among them, the Veneto Sviluppo award issued by the University of Padua. The system has been designed to guarantee impressive labour, water and detergent savings, and boasts a productivity rate between 3 to 5 times greater than traditional systems.
1. The ASC Eureka E81 is available with the following type of batteries:
- 4 x 6V gel batteries
- 4 x 6V standard batteries
And all machines are supplied with a comfortable, easy to use on-board battery charger.
2. Both scrubbers feature the possibility to adjust the brush pressure either at 40 kg or at 60 kg. For this reason, the machines can work on smooth floors where no abrasive action is required, as well as on rough surfaces.
Another very important feature is the self-adjusting splash-skirt which, besides preventing the dirty water from splashing also prevents water from leaking. Being in constant contact with the floor, the splash-skirt is one component most subject to wear, but Eureka’s skirt is self-levelling, to allow for excellent adherence to all floor types – whereas other competitor machines use a fixed rubber band, subject to water leaks when worn.
3. The drying system comprises a floor squeegee. Its shape is of significant importance as its primary function is to pick up dirty water with the aid of a vacuum motor. It is, in fact, when the drying takes place that work is optimized, as when one eliminates the soiled water all that is guaranteed to remain is a brilliantly clean and shiny surface.
We have equipped our scrubbers with an oscillating parabolic squeegee in order to better convey water to the centre of the machine even on sharp turns. The squeegee is tapered at the sides to increase air speed. Our innovation resides in a small air chamber which maximizes air velocity.
The squeegee is mounted on wheels and equipped with 2 knobs for the adjustment of incidence (angle of the squeegee) thus allowing equal pressure on the floor, and for the adjustment of pressure to the floor, both which can be optimized depending on the type of floor – be it uneven or smooth.
The squeegee can be rapidly released from its support without need of tools.
The blades are in linatex, which offer longer durability as they can be used on all 4 sides and have a higher grip on the floor for an impressive vacuuming performance.
In case of damage to the rubber blade, following a hit for instance, a standard scrubber would need a replacement, in our squeegee that is not necessary. Instead, you can continue to use it by turning the rubber 180 degrees and facing the damaged side up.
The squeegee is equipped with a quick release device which allows for a faster reversion/ replacement of the rubber blades.
4. The display is equipped with intuitive, simple to use one-touch controls. It includes the exclusive BRUSH O’MATIC system, which allows for a very fast and precise brush/pad replacement, without tools.
5. Safety is very important, and among other features designed to protect the operator, the machines are equipped with a “dead man” device which automatically pushes the scrubber forward in case the operator is trapped in a dead end.
6. The height of the handle bar can be adjusted for better operator comfort.
7. There are 2 tanks: the clean solution tank which contains fresh water plus detergent and the recovery tank which picks up dirty water, their capacity, in the ECO configuration, can be up to 300 litres.
The recovery tank can be totally opened for inspection and cleaning, while the solution tank is equipped with a steel filter to prevent the passage of debris into the tank.
The vacuum motor is protected by a patented device: a dust filter, class USGM, located within the recovery tank which protects the vacuum motor from dangerous debris and dust.
8. Designed around ASC Eureka’s ECO technology, these models can be supplied with the exclusive ECO system.
The recovery tank is equipped with a steel filter which allows the multiple use of water and detergent thus guaranteeing impressive labour, water and detergent savings, and boasts a productivity rate between 3 to 5 times greater than traditional systems.
This is a system designed to maximize the machine’s productivity by taking full advantage of the water solution. With a conventional machine, once the solution contained in the clean water tank is exhausted, the operator is forced to empty the recovery tank, and at the same time refill the solution tank with detergent and clean water. This subsequently wastes time, water, and detergent. Moreover, it has a particularly detrimental impact on the ecological system.
Here at Eureka, we offer a unique method to utilize water in such a way that you will increase labour productivity lost when squandered by emptying and refilling tasks. This also permits you to minimize the quantity of both cleaning detergent and water necessary.
Additionally, the Automatic Solution Dosing Device makes sure that the flow of solution is always proportional to the speed of the machine.
Read LessOnline Demonstration Videos
The following machine overview is demonstrated in videos . At any time this video may be paused, stopped, volume controlled and viewed in full screen mode - such features appear at the bottom of the video player. For help & technical issues please contact us by clicking here.
Features & Equipment
Asc EUREKA E81 TECHNICAL DATA
Cleaning path (mm) | mm | 810 |
---|---|---|
Cleaning capacity | m²/h | 3.650 |
Solution tank capacity | L | 75 |
Recovery tank capacity | L | 80 |
Drive | - | electronic assisted |
Forward speed | km/h | 4,5 |
Power | V | 24 |
Battery | V | 4 x 6 |
Battery charger | - | on-board |
Weight (inclusive of battery & charger) | kg | 308 |
Size (without squeegee) (l x w x h) | mm | 1.555 x 820 x 1.110 |
Squeegee width | mm | 995 |
Features & Equipment
Asc clients using this machine
Posted on Sunday, September 15, 2024Updated on Thursday, September 19, 2024
Days Eggs – Lower Light SA
The Client Days Eggs is based in the suburb of Lower Light, South Australia. Days Eggs is SA’s largest producer and distributor of fresh eggs. Through different produce brands, they provide the SA Market and interstate customers with premium, quality barn-laid and free range eggs. In their large sorting and
Read MorePosted on Thursday, September 5, 2024Updated on Thursday, September 5, 2024
OJI Fibre Solutions NSW
The Client Oji Fibre Solutions (OjiFS) is one of Australasia’s leading manufacturers of pulp, paper and wood-fibre based packaging solutions. They have a large facility in Sydney’s inner west town of Lansvale. The Challenge OjiFS have a large production and manufacturing plant. The plant has a large production line which
Read MorePosted on Monday, March 4, 2024Updated on Wednesday, September 4, 2024
Curtis Coast Automotive
The Client Curtis Coast Automotive is a car dealership based in Gladstone, QLD. They sell and service vehicles. The Challenge Ross, Curtis Automotive’s Manager, was looking for a floor scrubber to replace the old unit in his car dealership workshop. Ross wanted a floor scrubber that was easy to operate,
Read More